Application of Spectral Decomposition to Detection of Fracture-Cavity Carbonate Reservoir Beds in the Tahe Oiifieid, Tarim Basin, NW China

Ordovician fracture-cavity carbonate reservoir beds are the major type of producing formations in the Tahe oilfield, Tarim Basin. The seismic responses of these beds clearly changes depending on the different distance of the fracture-cavity reservoir bed from the top of the section. The seismic reflection becomes weak or is absent when the fracture-cavity reservoir beds are less than 20 ms below the top Ordovician. The effect on top Ordovician reflection became weaker with deeper burial of fracture-cavity reservoir beds but the developed deep fracture-cavity reservoir beds caused stronger reflection in the interior of the Ordovician. This interior reflection can be divided into strong long-axis, irregular and bead string reflections, and was present 80 ms below the top Ordovician. Aimed at understanding reflection characteristics, the spectral decomposition technique, which uses frequency to ＂tune-in＂ bed thickness, was used to predict Ordovician fracture-cavity carbonate formations in the Tahe oilfield. Through finely adjusting the processing parameters of spectral decomposition, it was found that the slice at 30 Hz of the tuned data cube can best represent reservoir bed development. Two large N-S-trending strong reflection belts in the mid-western part of the study area along wells TK440- TK427-TK417B and in the eastern part along wells TK404-TK409 were observed distinctly on the 30 Hz slice and 4-D time-frequency data cube carving. A small N-S trending reflection belt in the southern part along wells T403-TK446B was also clearly identified. The predicted reservoir bed development area coincides with the fracture-cavities connection area confirmed by drilling pressure testing results. Deep karst cavities occur basically in three reservoir bed-development belts identified by the Ordovician interior strong reflection. Spectral decomposition proved to be a useful technique in identifying fracture-cavity reservoir beds.     

Late Cenozoic Stratigraphy and Paleomagnetic Chronology of the Zanda Basin, Tibet, and Records of the Uplift of the Qinghai-Tibet Plateau

The characteristics of Late Cenozoic tectonic uplift of the southern margin of the Qinghai- Tibet Plateau may be inferred from fluvio-lacustrine strata in the Zanda basin, Ngari, Tibet. Magnetostratigraphic study shows that the very thick fluvio-lacustrine strata in the basin are 5.89- 0.78 Ma old and that their deposition persisted for 5.11 Ma, i.e. starting at the end of the Miocene and ending at the end of the early Pleistocene, with the Quaternary glacial stage starting in the area no later than 1.58 Ma. Analysis of the sedimentary environment indicates that the Zanda basin on the southern Qinghai-Tibet Plateau began uplift at -5.89 Ma, later than the northern Qinghai-Tibet Plateau. Presence of gravel beds in the Guge and Qangze Formations reflects that strong uplift took place at -5.15 and -2.71 Ma, with the uplift peaking at -2.71 Ma.     

甘肃王河金矿床地质特征及找矿方向

王河金矿床是李坝金矿田的组成部分。矿床产于秦岭造山带泥盆纪浅变质碎屑岩中,区域地质构造较复杂,岩浆活动频繁且强烈,是一受断裂、岩浆活动和蚀变带控制的蚀变岩型（工业类型为徽细粒浸染型）金矿。通过对矿床地质特征、控矿因素及找矿标志的研究认为,已知矿体深部及西部找矿潜力很大,应进一步开展找矿工作。     

基于退火BP神经网络的GPS高程转换

阐述模拟退火算法的基本思想和原理,提出并介绍模拟退火算法优化的BP神经网络模型在GPS高程转换中的具体应用,同时编写相应的MATLAB处理程序,结合大量数据进行仿真实验,结果表明文中提出的退火BP神经网络模型具有收敛速度快、精度高、避免陷入局部最小的优良特性。     

城市综合地下管线普查全过程监理技术方法

针对城市综合地下管线普查全过程监理的应用问题,着重探讨全过程监理的总体思路、组织架构与制度保障,进而给出地下管线普查各阶段监理的技术方法与实施要点。     

基于GIS的天水市滑坡危险性评价

本文通过统计学方法提取可能影响该地区滑坡的因子。并依据二元逻辑回归结果．利用GIS空间分析和建模功能,对研究区滑坡进行建模,再由相关性等级分析方法进一步获取相关影响因子对滑坡的影响范围,最终得出该区域滑坡危险性评价图。而在不同分辨率尺度上,对滑坡产生影响的因子有所相同,当分辨率由1000m-60m时,影响因子明显增多。以逻辑回归模型自身精度、滑坡实际发生比和坡度法为模型判定标准,发现120m分辨率下的滑坡发生概率模型能有效表达研究区滑坡发生状况。     

松辽盆地南部油气成藏期研究——以黑帝庙地区为例

应用储层流体包裹体均一温度测试结果,结合激光拉曼光谱显微探针成分分析与构造演化史分析,认为青山口组生成的油气主要存在一期充注,包裹体均一温度是90℃～110℃,对应的油气充注时间是从82.5 Ma开始.油气存在二期成藏,即嫩江组末期和明水组末期.嫩江组烃源岩生成的油气是二期充注,流体包裹体均一温度分别是90℃～100℃和110℃～120℃,油气分别由68 Ma和66 Ma开始充注,但以后者为主.主成藏期是一期,明水组末期-古近纪时期.今后油气勘探的主要目标是寻找由嫩江组烃源岩提供油源,形成于姚家组和嫩江组中的岩性油气藏及于明水末期-古近纪时期形成的岩性-构造油气藏.     

郯庐断裂带张八岭隆起北段的左旋走滑挤压变形及其~(40)Ar/~(39)Ar定年

郯庐断裂带张八岭隆起北段,自西向东分别出露北北东向的韧性滑脱变形带、脆-韧性过渡带和脆性的前陆褶断带。韧性滑脱变形带内的张八岭群片岩,广泛发生了低绿片相背景下的糜棱岩化。其中呈现为平缓的糜棱面理和近南北向的矿物拉伸线理。显微构造及石英C轴组构分析显示,该韧性滑脱带一致为上盘向南的运动。该带以东依次变为上盘向南南东→南东的逆冲活动,总体上为左旋走滑挤压变形带。张八岭群所在的韧性变形带为深部陡立走滑构造与浅部脆性构造之间的滑脱变形带,其间的差异走滑变形,造成了该滑脱层在总体向北运动中出现上盘向南的剪切变形。对6处张八岭群片岩中15个不同粒级白云母的40Ar/39Ar定年指示,变形发生在(236.2±0.5)~(238.0±0.4)Ma的中三叠世晚期。这表明郯庐断裂带的左行平移发生在华北与华南板块碰撞的深俯冲阶段,起源于陆内转换断层。     

基于一类新小波函数基的GPS相位观测值周跳探测

阐述了可通过1个参数因子来调节前后差分点个数的思路,研究了利用小波分析来平滑原始资料和探测GPS相位观测值周跳的方法,并通过CHAMP卫星实测数据进行分析,得出一些有益的结论.实践表明,该方法提高了周跳探测的有效性.